Sharons Inky Antics

Sharons Inky Antics
Independent Stampin' Up Demonstrator

Stampinup Wisteria Wishes (Wedding)

I know a lot of folks look at this stamp set and purple immediately comes to mind.  However, because of the time of year, the first thing I thought of was those Beautiful Outdoor Weddings with gorgeous White Wisteria hanging from the trees as the brides walks down the aisle to her groom. I tend to be a little theatrical at times.  Regardless, this particular card with Wisteria could be for any occasion such as Birthday, Anniversary or encouragement according to the sentiment used.


I will build a shopping list for you on the website below under My projects.

Items you will need for this card are:

Wisteria Wishes Dies
Celebrating You Stamp Set
Basic White Cardstock
Vellum Cardstock
Shimmer White Cardstock
Garden Green Cardstock
Early Espresso Cardstock
Balmy Blue Cardstock
Subtles Balmy Blue Designer Paper
Memento Ink
2021-2023 In Color Opal Rounds
Scalloped Contours Dies
Multipurpose Liquid Glue
Stampin' Cut Emboss Machine
Paper Trimmer
Paper Snips

Instructions:

Construct a standard card base using Basic White Cardstock. Cut an 8.5 x 11 in piece of cardstock in half vertically and folding to make a base that measures 5.5 x 4.25 in. 

Select Balmy Blue DSP from Subtles DSP pack. Cut DSP to 5.5 x 4.25 in then trim 1/16 off one horizontal side and one vertical side. Adhere to card base.

Cut a piece of Balmy Blue to 5 1/16 in x 3 3/8 in and adhere on top of DSP.

Die cut 4 of the vine pattern in Early Espresso.

Die cut two of the larger and one of the smaller Wisteria blooms in Shimmer White.

Die cut two of the larger and one of the smaller Wisteria blooms in Vellum Cardstock.

Die cut 3 of the leaf branches in Garden Green.

You will need to cut the top vine on the horizontal to fit to the Balmy Blue panel.

Assemble as shown placing the velum under each of the White Shimmer Wisteria Blooms(gives a sense of depth).

Stamp the Sentiment in Memento Black Ink onto Balmy Blue Cardstock and die cut with the smallest of the Scalloped Contours dies.  

Affix the Opal Rounds on the sentiment panel as shown.

Voila!

Thank you for stopping by and Happy Crafting!

See this card under the My projects tab...


Shop With Me:











on No comments:

Stampinup Nature's Prints with Texture Chic Designer Series Paper

I LOVE the Texture Chic Designer Series Paper! I opened it today and thought WOW, this could really go with a lot of stamp sets. It looks especially pretty with the Nature's Prints Stamp Set.





Items you will need for this card are:


Very Vanilla Cardstock
Pool Party Cardstock
Texture Chic Designer Series Paper
Painted Texture 3D Embossing Folder
Pool Party Classic Stampin Pad
Blushing Bride Classic Stampin Pad
Calypso Coral Classic Stampin Pad 
Stazon Ink Pad
Water Painters
Multipurpose Liquid Glue
2021-2023 In Color Opal Rounds
Stampin Dimensionals
Stampin' Cut & Emboss Machine
Paper Trimmer


I will build a shopping list for you on the website below under My Projects.

Instructions:

Construct a card base from Pool Party Cardstock by cutting 8.5 in x 11 in in half horizontally and folding in the middle to measure 5.5 in x 4.25 in.

Cut DSP to 5.5 x 4.25 in then trim 1/16 off one horizontal side and one vertical side. Adhere to card base.

Cut a piece of Very Vanilla cardstock to measure 2 and 1/8
in x 5 1/4 inches and dry emboss with Painted Texture 3D Embossing Folder. Adhere this panel to the right of the card base with DSP.

Stamp 3 of the individual flower blooms with Stazon Ink onto Very Vanilla Cardstock and Watercolor these using Blushing Bride and Calypso Coral Ink. Cut these images using coordinating dies.

Stamp Large Leaf and Sentiment onto Very Vanilla Cardstock using Pool Party Ink. Cut these using coordinating dies.

Using Blushing Bride, Stamp Twig and Fern image onto Very Vanilla Cardstock. Cut using coordinating dies.

Adhere Opal Rounds as shown or as desired.

Adhere your stamped and die cut sentiment to the bottom of the blossoms with Stampin Dimensionals.

Voila!

Thank you for stopping by and Happy Crafting!

See this card under the My projects tab...


Shop With Me:
















on No comments:

He's The Man Greeting made with Stampin'Up! Designer Series Paper

 Hello Stampers and Crafters!

Thanks to the StampinUp... He's The Man 12"x12" Specialty Designer Series Paper, I was able to make a cute card for my SIL.  And the good news?  All I needed was the DSP and basic black cardstock.  This pack has some glorious punch outs that assist in making the process so very easy.







Items needed for this card are:

He's The Man DSP
Basic Black Cardstock
Multipurpose Liquid Glue
Paper Trimmer

Instructions:

Cut a 5.5 x 4.25 inch card base in Basic Black.

Cut the black DSP(designer series paper) from the pack (the one with the pig on it) to the same size as the base.

Then, cut this same piece on the diagonal. Adhere this to the left side of the black base.

The rest is easy.  Punch out the grill, the arrow, and the You're Flippin Awesome pieces from the DSP pack.  Adhere them as shown.  I did add a circle of the flipside of the black DSP under the grill.  You can trace a circle, use a square, or adhere the grill directly to the DSP.  I had a few gold stars in my stash that I added for interest.  Adorable right? And a Flippin Awesome way to let your man know he is Flippin Awesome.

Isn't it just the coolest? 

Thank you for visiting and Happy Crafting!

on No comments:

Stampin'Up! Bottled Happiness

Hello Stampers and Crafters! This is a fun little greeting created by using the Stampin'Up! Bottled Happiness Stamp Set and Coordinating Bottle Punch.




Items you will need for this card are:

Bottled Happiness Stamp Set
Coordinating Bottle Punch
Parakeet Party Classic Stampin Pad
Tahitian Tide Classic Stampin Pad
Orchid Oasis Classic Stampin Pad
Basic White Cardstock
Painted Texture 3D Embossing Folder
Stamparatus
Paper Snips Scissors
Multipurpose Liquid Glue
Stampin Dimensionals
Stampin' Cut & Emboss Machine
Blending Brushes
Paper Trimmer


I will build a shopping list for you on the website below under My projects.

Instructions:

Construct a standard card base using Basic White Cardstock. Cut an 8.5 x 11 in piece of cardstock in half vertically and folding to make a base that measures 5.5 x 4.25 in. 

Cut another piece of Basic White Cardstock to 5.5 in. x 4.25 in. Trim 1/4 in. from the Vertical and the
Horizontal side of this panel.

We are going to color this panel using Blending Brushes and Ink from the 3 Classic Stampin pads listed above.  Starting with the Parakeet Party, dip your blending bush into the ink and tap the excess off onto a scrap piece of paper.  Slowly begin working the ink onto the panel about one third of the way down. Continue applying ink until the saturation is to your liking. Repeat with a clean brush using the Tahitian Tide into the middle of the panel blending into the Parakeet Party. Lastly, with a clean brush, repeat the process using Orchid Oasis on the bottom part of the panel blending into the Tahitian Tide. 

Take this colored panel and insert into the Painted Texture 3D Embossing Folder. Run the folder through the Stampin' Cut & Emboss Machine.

Using the Bottled Happiness Stamp Set, select the Blossoms Stamp and stamp this in Tahitian Tide ink onto Basic White cardstock.

Using the Stamparatus, place the cardstock with the Tahitian Tide Blooms onto the Stamparatus. Select the leafy Stamp from the Bottled Happiness Stamp set and place it stamp side down on top of the Tahitian Tide blooms. Line it up perfectly so the two are matched and close the lid of the Stamparatus to allow the Leafy stamp to stick.  Ink the Leafy bloom stamp with Parakeet Party ink. Wipe any excess off the lid and close to stamp onto the blossom.  

Using Paper Snips Scissors, fussy cut around the blossoms and leaves image until it is completely cut out.

Select the full image bottle stamp and stamp it in Tahitian Tide onto Basic White cardstock.  Punch this image out using the Bottle Paper Punch.

Stamp the sending a little message sentiment or any other sentiment you wish and use any die cut to cut the shape around it.

Apply Stampin dimensionals to the back of the stamped blossoms image and adhere it to the colored and embossed panel. 

Adhere the bottle image to the bottom of the blossoms tucking it just underneath so that it looks like the blossoms overhang the top of the bottle a bit. 

Adhere your stamped and die cut sentiment to the right of the blossoms.

Voila!

Thank you for stopping by and Happy Crafting!











on No comments:

Stampin'Up! Precious Tea Boutique



Stampin'Up! Tea Boutique Greeting with Curtain Fold



Items you will need for this card are...

Tea Boutique Bundle
Bottled Happiness Stamp Set
Stitched Circle Die - 2.75 in.
Tahitian Tide Classic Stampin Pad
Crushed Curry Classic Stampin Pad
Basic White Cardstock
Tahitian Tide Cardstock
Parakeet Party Cardstock
VersaMark Pad
Linen Thread
Multipurpose Liquid Glue
Stampin Dimensionals
Mini Stampin' Cut & Emboss Machine
Paper Trimmer

I will build a shopping list for you on the website below under My projects.

Instructions:

Construct a standard card base using Basic White Card base by cutting an 8.5 x 11 in piece of cardstock in half vertically and folding to make a base that measures 5.5 x 4.25 in. 

Cut a panel of Parakeet Party to 5.5 x 4.25 inch, then trim 1/4 in. from one vertical and one horizontal side. Select the leaf stamp from the Tea Boutique stamp set and stamp it randomly on one half of the Parakeet Panel in VersaMark ink.  Select the single blossom from the same stamp set and stamp it randomly on the other half of the Parakeet Party panel as shown.



Next, we will construct the curtain fold panel. Cut a piece of Tahitian Tide Cardstock to 10 3/4 in. x 2 1/2 in. Select the blossom stamp from the Bottled Happiness Stamp Set and randomly stamp across the panel with VersaMark ink.  Using the diagram {https://beccysplace.blogspot.com/2019/09/tutorial-curtain-fold-card.html} from Becky's Place blog, cut this panel on a slant to the specifications above. Score and fold at each score mark. Adhere to the Parakeet Party panel with the widest part of the curtain fold to the left leaving about 1/16 in. gap at the bottom. Apply one dimensional on the right to secure the gapped height to the card panel.

Cut a circle of Basic White Cardstock using the Stitched circle die.

Using the single blossom stamp from the Tea Boutique, stamp three little blossoms on the top of the circle in Tahitian Tide.

Stamp the "I can't thank you enough" sentiment onto Basic White Cardstock then cut it using the tiny tag from the Tea Boutique Stamp set with the Matching die.

Cut a solid teacup in Parakeet Party using the solid teacup die.

Cut a filagree teacup in Tahitian Tide using the filagree teacup die. 

Apply adhesive to the filagree die cut and adhere it to the solid teacup. 

Stamp the lemon slice in Crushed Curry and cut out with matching die. Cut in almost half and adhere to the top right of the teacup near the handle. 

Tie a piece of linen thread around the handle of the cup. Punch a small hole in the top of the tag with the thank you sentiment and tie it on.

Adhere the teacup to the bottom of the white stitched circle below the blue blossoms.

Using dimensionals, adhere the circle above the curtain fold tucking it slightly under. 

Voila!

That is a beautiful greeting!

Thanks so much for stopping by and Happy Crafting!


on No comments:
Subscribe to: Posts (Atom)